Tag Archives: H12-322_V1.0-ENU questions and answers

02 Dec

New H12-322_V1.0-ENU Exam Questions – Read H12-322_V1.0-ENU Free Test Online

To earn HCIP-WLAN certification requires to take and pass H12-321_V1.0-ENU and H12-322_V1.0-ENU exams successfully. Today, new H12-322_V1.0-ENU exam questions coming with actual questions and answers ensure that you can pass HCIP-WLAN-POEW V1.0 certification exam successfully.

New H12-322_V1.0-ENU exam questions written by the team of HCDAtest, containing 325 questions and answers. You can read Huawei H12-322_V1.0-ENU free test online to check the high quality of Huawei H12-322_V1.0-ENU exam questions. There are 25 free questions below, which could be the demo for checking HCDAtest H12-322_V1.0-ENU exam questions. Any other questions, please contact us freely: [email protected].

Begin to Test:

1. Calculation formula of signal field strength (without considering factors such as interference and line loss) is:

Question 1 of 25

2. A company wants to deploy outdoor WLAN, the AP equipment selected is Huawei outdoor AP6510DN. In order to save costs, engineers plan to directly supply power to the AP through AC6605.
At this time, AC6605 just installed a 500W of PoE power modules, AC6605 work requires 120W of power, then how many AP6510DN can the AC6605 power?

Question 2 of 25

3. In which of the following situations, the DHCP relay function must be enabled?

Question 3 of 25

4. Which of the following are not the rail transit redundant service design?

Question 4 of 25

5. During the WLAN security planning, in order to support the self-registration of visitors, it is recommended that the authentication method which is set for visitors is:

Question 5 of 25

6. In the WDS+ dual link scenario, the number of heartbeat packet detections should be set as:

Question 6 of 25

7. In a school dormitory scenario, WLAN needs to be deployed, and the customer proposes to maximize the bandwidth. Which of the following methods can best meet the customer's needs?

Question 7 of 25

8. Which of the following descriptions about using the WLAN Tester 2.0 tool to conduct site surveys is correct?

Question 8 of 25

9. When deploying a WLAN network, a reasonable CCA threshold can be configured to reduce signal interference and increase the degree of channel reuse. If AP deployment is dense and you want to reduce the actual coverage area to ignore weak remote signals, and increase the CCA threshold.

Question 9 of 25

10. In order to prevent network attacks based on source address spoofing, the binding table matching check is performed on the received IP packets to prevent illegal packets from passing through the AP and improve the security of the network. Which of the following functions can be enabled?

Question 10 of 25

11. Which of the following options is the most important reason for small and medium enterprises to use WLAN?

Question 11 of 25

12. When planning a LAN network and calculating the number of APs, only the bandwidth load needs to be considered.

Question 12 of 25

13. In the VRRP hot backup scenario, which of the following description of the WAC 's CAPWAP source address is correct?

Question 13 of 25

14. When planning indoor WLAN, it is recommended that the deployment height of omnidirectional antennas does not exceed 6m.

Question 14 of 25

15. Which of the following wireless applications has higher requirements to bandwidth and real-time?

Question 15 of 25

16. In a project, the two sites are 3km apart, but there is an 18m high building in the middle of the two points, and there are no higher obstacles in other locations. When using 5G backhaul, how many meters should the installation height of the two sites be at least?

Question 16 of 25

17. In WDS and Mesh networks, in order to avoid interference from other signals on the backbone link, the 2.4GHz frequency band is generally used as the frequency band for network backhaul.

Question 17 of 25

18. In the WLAN outdoor coverage scenario, in order to ensure the balance of the uplink and downlink, which of the following is the most effective way?

Question 18 of 25

19. What AP models can be used for indoor WLAN deployment?

Question 19 of 25

20. A 5dB coupler has a coupling degree of 5dB and an insertion loss of 2dB. If the input signal power is 17dBm, the output power of the coupling port is:

Question 20 of 25

21. Which of the following is not a method to increase the coverage signal strength range?

Question 21 of 25

22. What is the core of the wireless medical positioning system?

Question 22 of 25

23. Pre-sales network planning is a kind of business development, not a big project generally does not need to be undertaken.

Question 23 of 25

24. The 14 channels in 2.4 GHz only support the 802.11b protocol, which is only available in Japan.

Question 24 of 25

25. The life cycle of Huawei's enterprise services has 5 different stages: Plan, Design, Implement, Operate, and Improve, referred to as PDTOI.

Question 25 of 25


 


Recent Posts


Tags

H12-211-ENU H12-211-ENU online test H12-211-ENU practice test H12-221 H12-221-ENU H12-221-ENU online test H12-222 H12-222-ENU H12-223 H12-223-ENU H12-261 H12-261-ENU H12-261-ENU online test H12-261-ENU practice test H12-261-ENU questions and answers H12-311-ENU H13-511-ENU H13-511-ENU exam dumps H13-511-ENU latest dumps H13-511-ENU questions and answers H13-511-ENU real exam questions H13-511-ENU real questions H13-511-ENU test prep H13-511-ENU training materials H13-611-ENU H13-623-ENU exam dumps H13-629-enu H19-301-ENU exam dumps H19-307-enu H19-308 H19-308-ENU H19-308-ENU exam dumps H31-211-ENU H31-211-ENU exam dumps HCDA (Carrier IP) HCNA HCNA-Cloud-BCCP HCNA-HNTD HCNA Storage HCNP HCNP-R&S-IENP HCNP-Storage Huawei Certified Internetwork Expert-Routing & Switching Huawei Certified Network Associate-Building Cloud Computing Platform Video Conference